Iphone 8 latest disassmebling report !
PCB inquiry on Friday, apple’s official website iPhone 8 page “pre-sold” button has been changed to “buy”, legal channels iPhone and iPhone 8 August Plus formally in apple’s official website as well as the major channel to sell, but it became the most cold in the history of the iPhone.
A lot of people found that in addition to be replaced with a glass cover, the iPhone 8 and 7 on the internal design almost the same as the iPhone.
X-ray look at the internal structure

Unload the screen panel
Separating the screen panel and the fuselage
Disassembling the battery

In terms of batteries, the iPhone 8 has indeed shrunk in size compared to the previous one, and this time the battery is only 1821 milliampere, below the iPhone 7’s 1960 milliamp.Still, apple says it will stay on the same level as the iPhone 7.
Detached main camera

Separate Taptic Engine vibration motors, which have found some previously unseen connections and brackets.
1. The Lightning interface module adopts a new meat color stand, which also holds the Taptic Engine motor
2. Strange speaker connection cable
3. The Taptic Engine motor is installed in a compact connector

The final barrier of the logic board – a screw is hidden under a waterproof seal


Red: apple 339S00434 A11 Bionic CPU SK hknnnbrmmuur 2GB LPDDR4 RAM
Orange: qualcomm MDM9656 snapdragon X16 LTE chip
Yellow: the Skyworks SkyOne 78140
Green: Avago 8072JD130
Light blue: P215 730N71T
Blue: Skyworks 7736-17 four-frequency GSM power amplifier module
Pink: NXP 80V18 NFC module
The back of the logic board:
The speaker component, apple says it raises the volume of speakers at 25%.You can see the details of the rubber pad and waterproof sealing parts at the bottom of the border.

The reason why apple will replace the Lightning interface module is that the interface and cable are connected to the wireless charging module.
The two layers of masking stickers have been ripped apart to see the wireless charging ring, and there is little visible copper wire, which is the charm of apple’s technology.

Separating the glass backboard and the metal border, it’s tough, apple USES a lot of glue to glue, separate the glass back, and the border basically pulls out of shape.
Back to the screen panel, remove the Touch ID fingerprint identification module
Front camera, integrated sensor module and cable
The screen module, though not an OLED panel, supports True Tone and is pleased.

Continuously updated…
Dtails can be found on the website of SFM.